Hollow Shaft Helical Bevel Gear Motor

Hollow Shaft Helical Bevel Gear Motor

The Hollow Shaft Helical Bevel Gear Motor combines a right-angle helical-bevel gear transmission with a hollow output shaft for industrial machinery requiring shaft-mounted drive arrangements.

Product Overview

The Hollow Shaft Helical Bevel Gear Motor combines a right-angle helical-bevel gear transmission with a hollow output shaft for industrial machinery requiring shaft-mounted drive arrangements. This hollow shaft helical bevel gear motor provides a 90-degree power transmission direction, while the hollow shaft provides a connection point for driven machine shafts.

This configuration is suitable for industrial equipment where the motor and gearbox need to be integrated with an existing transmission shaft. Available connection arrangements include keyed hollow shafts, shrink disc connections and TorqLOC® shaft connections. These options allow buyers to select a connection structure according to the driven equipment design.

The product belongs to the K-series helical-bevel gear motor product range. Motor power, transmission ratio, output torque and shaft dimensions are selected according to the required model and configuration.

Key Features

Right-Angle Helical-Bevel Gear Transmission

The helical-bevel gear arrangement provides a 90-degree power transmission direction. This structure is used in machinery where the input and output shaft directions need to be arranged at a right angle.

Hollow Shaft Output Design

The hollow output shaft accommodates a driven machine shaft, providing a shaft-mounted connection arrangement. The shaft bore and connection structure need to correspond to the dimensions of the driven equipment.

Multiple Shaft Connection Options

Available connection configurations include keyed hollow shafts, shrink disc connections and TorqLOC® shaft connections. These options provide different approaches to connecting the gearbox to the driven shaft.

Flexible Mounting Arrangements

Depending on the selected model, mounting arrangements include shaft-mounted installation, flange mounting and torque-arm-supported installation. The applicable mounting configuration should be confirmed for the selected gearbox model.

Multiple Motor and Gearbox Configurations

Motor power, transmission ratio and output torque can be matched to different equipment requirements through the available K-series configurations. The specific technical values depend on the selected model rather than representing one universal specification.

Technical Specifications

The following table identifies the main selection parameters and configurations for the Hollow Shaft Helical Bevel Gear Motor. Specific values must be matched to the selected model.

Parameter Specification
Product Type Hollow Shaft Helical Bevel Gear Motor
Gear Arrangement Helical-Bevel Gear
Transmission Direction Right-Angle, 90°
Output Shaft Type Hollow Shaft
Shaft Connection Options Keyed Hollow Shaft, Shrink Disc, TorqLOC®
Mounting Arrangements Shaft-Mounted, Flange-Mounted, Torque-Arm-Supported
Motor Power Selected according to model
Transmission Ratio Selected according to model
Output Torque Selected according to model
Output Speed Determined by motor speed and transmission ratio
Motor Configuration Selected according to electrical requirements
Housing Material Model-dependent
Thermal Protection Configuration-dependent

Applications

The Hollow Shaft Helical Bevel Gear Motor can be considered for industrial machinery requiring right-angle transmission and hollow-shaft output connections.

Conveyor Systems

Used in conveyor drive arrangements where the gearbox connects to a driven shaft. Hollow-shaft mounting can be considered when the conveyor structure is designed around a shaft-mounted drive.

Material Handling Equipment

Suitable for evaluating drive configurations in material handling machinery that requires a compact right-angle transmission arrangement and a hollow output connection.

Industrial Production Machinery

Can be specified for production equipment requiring controlled rotational output through a right-angle gear transmission. The required output speed and torque determine the appropriate gearbox configuration.

Packaging and Processing Equipment

Applicable to machinery with integrated shaft-driven components where the motor and gearbox need to connect directly to the driven equipment shaft.

Industrial Mechanical Systems

Can be considered for customized machinery and equipment assemblies requiring a hollow-shaft helical-bevel drive arrangement.

Shaft Connection and Mounting Options

The connection design is an important part of the product configuration.

Connection or Mounting Type Configuration
Keyed Hollow Shaft Hollow shaft with keyway connection
Shrink Disc Clamping connection between the hollow shaft and driven shaft
TorqLOC® Shaft connection system for compatible hollow-shaft configurations
Shaft-Mounted Installation Gearbox supported through the driven machine arrangement
B5 Flange Mounting Flange-based installation where supported by the selected model
Torque Arm Torque-arm-supported installation where available

The shaft diameter, keyway dimensions, connection method and mounting arrangement should be confirmed against the selected model before ordering.

Model Selection and Customization

The product configuration is determined by the operating requirements and mechanical interface of the driven equipment.

The main selection parameters include:

  • Motor power: Select according to the required drive power.
  • Transmission ratio: Match the gearbox ratio to the required output speed.
  • Output torque: Check the required torque against the selected model's rated operating data.
  • Hollow shaft diameter: Match the shaft bore to the driven machine shaft.
  • Connection method: Choose between keyed hollow shaft, shrink disc and compatible TorqLOC® configurations.
  • Mounting arrangement: Confirm shaft-mounted, flange-mounted or torque-arm-supported installation according to model availability.
  • Motor configuration: Specify the required voltage, frequency and other electrical requirements.

Available configuration choices include different hollow-shaft connection arrangements and mounting options. Mechanical parts and equipment can also be manufactured according to customer drawings or physical samples. The feasibility of changes to the gearbox itself must be evaluated separately against the requested model.

Frequently Asked Questions

What is a Hollow Shaft Helical Bevel Gear Motor?

It is a gear motor combining a helical-bevel transmission arrangement with a hollow output shaft. The gearbox changes the transmission direction by 90 degrees and connects to a driven machine shaft through the hollow output.

What hollow-shaft connection options are available?

The available product configurations include keyed hollow shafts, shrink disc connections and TorqLOC® shaft connections. Availability depends on the selected model.

Can the gearbox be installed directly on a machine shaft?

The hollow-shaft design supports shaft-mounted arrangements. The driven shaft diameter, connection structure and mounting requirements must match the selected gearbox configuration.

How do I select the correct transmission ratio?

The transmission ratio should correspond to the required output speed and motor speed. The final selection also needs to account for the required output torque and the gearbox model's rated operating conditions.

Can the motor power and shaft dimensions be customized?

Motor and gearbox configurations should be selected from the available model specifications. Changes to shaft dimensions or other mechanical components require technical evaluation. Manufacturing based on customer drawings or samples is also available for applicable mechanical parts and equipment.

What information is needed for a quotation?

The main information includes required motor power, transmission ratio, output torque, hollow-shaft diameter, connection type, mounting arrangement and order quantity. Existing equipment drawings or shaft photographs can also help identify the required configuration.

Request a Quote

Looking for a hollow shaft helical bevel gear motor for your industrial equipment?

Send us your required motor power, transmission ratio, output torque and hollow-shaft dimensions. You can also provide equipment drawings, shaft photographs or an existing gearbox model reference.

We will review the mechanical connection requirements and available product configurations to help identify a suitable gear motor for your purchasing project.

Hot Tags: hollow shaft helical bevel gear motor, China hollow shaft helical bevel gear motor suppliers, factory

Send Inquiry