Product Overview
Helical bevel gear motors combine helical and bevel gear stages to reduce motor speed and transmit power through a right-angle drive arrangement. The input and output shafts are typically positioned at 90 degrees, making this gear motor type suitable for industrial machinery that requires a change in drive direction.
The existing K Series product range includes models such as K107, KA107, KA67 and KA77. Product configurations include solid-shaft and hollow-shaft designs, with different mounting arrangements depending on the model. Gearbox and motor combinations are also listed, including K107 with a DRN160L4 IE3 motor and KA107 with a DRN160M4 IE3 motor.
For equipment manufacturers and industrial buyers sourcing industrial helical bevel gear motors, the main selection factors are output torque, reduction ratio, output speed, shaft connection, mounting arrangement and motor requirements. These details should be matched to the driven machine and its operating conditions.
Key Features
Right-Angle Power Transmission
The bevel gear stage changes the direction of power transmission, allowing the input and output shafts to form a right-angle arrangement. This configuration is suitable for machinery that requires a different drive layout from an inline gear motor.
Combined Helical and Bevel Gearing
The gearbox combines helical and bevel gear stages for speed reduction and torque transmission within one gear unit.
Solid and Hollow Shaft Options
The K Series product range includes solid-shaft and hollow-shaft configurations. Hollow-shaft models listed on the product pages include keyed, shrink-disc and TorqLOC® connection options, depending on the selected model.
Different Mounting Arrangements
Product pages list foot-mounted, flange-mounted and shaft-mounted arrangements. The appropriate mounting design depends on the gearbox model and the machine's installation requirements.
Gearbox and Motor Combinations
The K Series gearboxes can be supplied as gear motor assemblies with compatible electric motors. Existing product examples include DRN series motor combinations. Motor power, rated speed and electrical supply should be matched to the application.
Product Types and Configurations
K Series Helical Bevel Gear Motors
The K Series is used for industrial right-angle drive applications. Different gearbox sizes and output configurations are available within the series. Selection depends on the required output torque, reduction ratio, motor power and installation conditions.
Representative models listed on the website include K107, KA107, KA67 and KA77.
Solid Shaft Gear Motors
Solid-shaft configurations connect to driven equipment through a suitable mechanical connection, such as a coupling or other transmission component. Shaft dimensions and connection details should be matched to the machine drawing.
Hollow Shaft Gear Motors
Hollow-shaft configurations connect to a compatible driven-machine shaft. Depending on the model, the product pages list keyed hollow-shaft, shrink-disc and TorqLOC® connection designs. The shaft diameter and connection method should be checked before ordering.
Foot-Mounted and Flange-Mounted Configurations
Foot-mounted gear units are secured to a machine base or support structure. Flange-mounted configurations connect to a compatible machine interface. Mounting dimensions and installation position should be confirmed against the selected model.
Shaft-Mounted Configurations
Shaft-mounted designs connect the gearbox to the driven machine through its output shaft. The machine shaft dimensions and required support arrangement are important when selecting this configuration.
Technical Specifications
The following table summarizes the main product information and selection parameters. Model-specific ratings and dimensions should be checked against the corresponding product documentation.
| Parameter | Product Information |
|---|---|
| Product type | Helical bevel gear motor |
| Product series | K Series |
| Representative models | K107, KA107, KA67, KA77 |
| Gear arrangement | Helical bevel, right-angle drive |
| Output shaft | Solid shaft or hollow shaft, depending on model |
| Hollow shaft connections | Keyed, shrink-disc or TorqLOC® options, depending on model |
| Mounting arrangements | Foot-mounted, flange-mounted or shaft-mounted, depending on model |
| Motor configuration | Gearbox with compatible electric motor |
| Motor examples | DRN160L4 IE3, DRN160M4 IE3 |
| Main selection parameters | Motor power, gear ratio, output speed, output torque and operating conditions |
Applications
Conveyor Systems
Helical bevel gear motors drive belt, chain and roller conveyors where a right-angle output arrangement is required. Selection should account for conveyor speed, transported load, starting frequency and operating hours.
Material Handling Equipment
Transfer equipment and industrial handling machinery require drive units matched to the load and movement requirements. Output torque, shaft connection and mounting arrangement are important when integrating the gear motor into the equipment.
Packaging Machinery
Packaging lines use gear motors to drive conveying, feeding and transfer mechanisms. Required output speed, start-stop frequency and installation space are important selection factors.
Industrial Processing Equipment
Mixing and processing machinery may require a right-angle drive with sufficient output torque for the operating load. The selection should consider load variation and the machine's operating cycle.
Automated Production Lines
Production equipment uses geared motors to drive individual machine sections. The reduction ratio, motor requirements and mechanical connection should match the production-line design.
Key Selection Factors
Required Output Speed and Gear Ratio
Determine the output speed required by the driven machine. If the motor speed is known, the approximate reduction ratio can be calculated as:
i = n1 / n2
Where:
- i is the reduction ratio.
- n1 is the motor input speed in rpm.
- n2 is the required output speed in rpm.
Select the final ratio from the available options for the relevant gearbox model.
Output Torque and Motor Power
The gearbox must provide sufficient torque for the driven equipment. A preliminary output torque estimate can be calculated using:
Where:
- T2 is the estimated output torque in Nm.
- P1 is the motor power in kW.
- η is the total drive efficiency.
- n2 is the output speed in rpm.
Final selection should also account for load variation, starting conditions and the gearbox's rated capacity.
Output Shaft Configuration
Choose a solid shaft or hollow shaft according to the driven machine's connection design. For hollow-shaft configurations, confirm the shaft dimensions and connection method, such as a keyway or shrink-disc arrangement.
Mounting Arrangement
Check whether the equipment requires foot mounting, flange mounting or shaft mounting. For replacement applications, provide the existing gearbox model and mounting dimensions to help identify a suitable configuration.
Motor Requirements
Confirm the motor power, rated speed, voltage, frequency and phase. For variable-speed applications or equipment with frequent starts, provide the control requirements and operating cycle for motor selection.
Frequently Asked Questions
What is a helical bevel gear motor?
A helical bevel gear motor combines an electric motor with a gearbox that uses helical and bevel gear stages. It reduces motor speed and changes the direction of power transmission through a right-angle drive arrangement.
What is the difference between a K Series and a KA Series gear motor?
Both belong to the K Series helical bevel product family. The model designation identifies different gearbox configurations. For example, the website lists KA models with hollow-shaft output arrangements. Check the individual model documentation for its exact shaft and mounting design.
Can I choose between a solid shaft and a hollow shaft?
The existing product range includes both solid-shaft and hollow-shaft configurations. The suitable option depends on the driven machine's shaft design and connection requirements.
What hollow-shaft connection options are available?
Product pages list keyed hollow-shaft, shrink-disc and TorqLOC® connection options for relevant models. The available connection should be checked against the selected model.
Can the gearbox be supplied with an electric motor?
The existing product range includes K Series gearbox and DRN series motor combinations. Motor power, speed and electrical requirements should be matched to the driven equipment.
What information should I provide when requesting a quotation?
Provide the required motor power, output speed, output torque or driven load, reduction ratio, shaft configuration, mounting arrangement, electrical supply and application details. For replacement orders, an existing model number or nameplate photograph is also useful.
Request a Quote for Helical Bevel Gear Motors
Send your equipment requirements and drive specifications to help identify a suitable helical bevel gear motor.
Please include:
- Required motor power and rated speed
- Required output speed or reduction ratio
- Required output torque or driven equipment load
- Solid-shaft or hollow-shaft requirement
- Required mounting arrangement
- Motor voltage, frequency and phase
- Operating hours and load characteristics
- Required quantity
- Existing gearbox model or equipment drawing, if available
Xiamen Shuilin Zhitou Technology Co., Ltd.
Email: info@xmslzt.cn
Website: https://www.sew-flenderreducer.com/
We're well-known as one of the leading helical bevel gear motor suppliers in China. Please feel free to buy custom made helical bevel gear motor from our factory. Good service and quality products are available.







