Overrunning Clutches

Category Overview

Overrunning Clutches are one-way power transmission components used in industrial drive systems. They transmit torque in one direction and allow free rotation when the driven side overruns the driving side. Depending on the design, a clutch may also provide backstopping or indexing functions.

As a China-based industrial clutch supplier, we offer different product configurations, including sprag overrunning clutches, backstopping clutches, and integrated freewheel units. These configurations serve different drive arrangements, so selection should be based on the required operating function, torque, shaft dimensions, and mounting requirements.

 
 

Product Types and Operating Functions

Sprag Overrunning Clutches

Sprag-type clutches use wedging elements between the inner and outer races to transmit torque in one direction. Depending on the model and drive arrangement, they can be used for overrunning, backstopping, or indexing.

Backstopping Clutches

Backstopping clutches allow rotation in the intended operating direction and prevent reverse rotation. They are used in applications such as inclined conveyor drives where reverse movement must be restrained when the drive stops.

Integrated Freewheel Units

Integrated freewheel units combine a freewheel mechanism with supporting or mounting components. Product configurations differ by series. Check the shaft dimensions, housing interfaces, and mounting arrangement before selecting a unit for new equipment or replacement.

Key Selection Factors

Operating Function

Identify whether the application requires overrunning, backstopping, indexing, or a combination of functions. Not every clutch model supports all three functions.

Torque Requirement

Provide the required operating torque and relevant peak or starting torque information. Compare the machine's load requirements with the rated torque of the selected model.

Shaft and Mounting Dimensions

Shaft diameter, keyway dimensions, bore fit, mounting space, and connection arrangement are essential when selecting a clutch. For replacement inquiries, provide the existing model number or dimensional information.

Operating Conditions

Provide the operating speed, temperature, lubrication requirements, and installation conditions. These details are needed to check the suitability of the selected model; operating limits should be confirmed for the specific product.

Representative Product Specification

The following data apply specifically to the FSO600-45MM sprag overrunning clutch listed in this category. They should not be treated as specifications for every model.

Specification FSO600-45MM
Product Type Sprag Overrunning Clutch
Bore Diameter 45 mm
Rated Torque 3,060 Nm
Operating Functions Overrunning, Backstopping, Indexing
Mounting Type Shaft-mounted
Shaft Connection Standard keyway
Bore Fit H7

Applications

Conveyor Drive Systems

Backstopping clutches are used in conveyor drive arrangements where reverse rotation must be prevented. Overrunning clutches can also be used in suitable multi-drive arrangements where an auxiliary drive needs to freewheel when the main drive takes over.

Auxiliary Drive Systems

An overrunning clutch can allow an auxiliary drive to freewheel when another drive takes over, provided the clutch and drive arrangement are selected for that operating sequence.

Indexing Machinery

Indexing applications use one-way torque transmission to produce intermittent movement. The selected clutch must match the machine's motion sequence and operating requirements.

Mounting and Configuration Options

Configuration options vary by product. Options listed for certain products include metric or inch bore configurations, special keyway dimensions, high-temperature FKM seals, surface coatings, torque arms, and mounting flanges.

These options are not standard features of every model. Confirm the available options and required configuration for the selected clutch before ordering.

FAQ

What is the difference between an overrunning clutch and a backstop?

An overrunning clutch allows one component to rotate faster than the driving component without transmitting torque back to it. A backstop prevents reverse rotation. Some clutch designs support both functions, but suitability depends on the specific model and drive arrangement.

What information is needed to select an overrunning clutch?

Provide the required operating function, torque, shaft diameter, keyway dimensions, operating speed, mounting arrangement, and operating conditions. An existing model number or product identification photo is also useful for replacement inquiries.

Can an overrunning clutch replace an existing unit?

Replacement suitability depends on the operating function, torque rating, dimensions, shaft connection, and mounting arrangement. Provide the existing model number or product details so the corresponding configuration can be checked.

Request a Quote

Send us the required operating function, torque, shaft dimensions, mounting details, and quantity to request a quotation from our China-based overrunning clutch supplier team. For replacement inquiries, include the existing model number or a product photo to help identify the relevant configuration.

We're well-known as one of the leading overrunning clutches suppliers in China. Please feel free to buy custom made overrunning clutches from our factory. Good service and quality products are available.