Product Overview
FALK Steelflex Grid Coupling is a flexible grid coupling designed to transmit torque between connected shafts while accommodating limited shaft misalignment and torsional vibration. Its serpentine steel grid engages with the hub teeth to provide a flexible mechanical connection between driving and driven equipment.
The T10 design uses a split cover and a lubricated grid assembly. This construction allows the coupling to be inspected and serviced without moving the connected equipment, making it suitable for industrial drives where maintenance access and reliable torque transmission are important.
Available sizes include 1140T and 1210T, with different torque ratings, speed limits and bore ranges. Selection should be based on the actual operating torque, shaft dimensions, speed and installation conditions.
Key Features
Serpentine Steel Grid
The alloy steel grid fits into the grooves of the coupling hubs and transmits torque through its flexible engagement with the hub teeth. The grid structure accommodates limited angular, parallel and axial misalignment within the coupling's allowable operating limits.
Torsional Flexibility
The flexible grid helps reduce the transmission of torsional shock loads and vibration between connected shafts. Actual performance depends on the selected coupling size, operating torque and system characteristics.
Split Cover Construction
The split cover provides access to the grid and lubricant for inspection and maintenance. The cover design allows servicing without requiring the connected shafts to be moved apart.
Grease Lubrication
The grid assembly operates with grease lubrication. Correct lubricant selection, filling and maintenance intervals should follow the applicable manufacturer's instructions.
Technical Specifications
| Parameter | 1140T | 1210T |
|---|---|---|
| Coupling Series | Steelflex T10 | Steelflex T10 |
| Rated Torque | 28,600 Nm | 249,000 Nm |
| Maximum Speed | 1,650 rpm | 820 rpm |
| Minimum Bore | 67 mm | 178 mm |
| Maximum Bore | 200 mm | 390 mm |
| Grid Material | Alloy Steel | Alloy Steel |
| Cover Design | Split Cover | Split Cover |
| Lubrication | Grease | Grease |
The listed values identify two size options in the T10 series. Confirm the exact coupling size, hub bore, keyway and shaft connection requirements before ordering. Maximum bore availability may depend on the selected hub and finished-bore configuration.
Applications
FALK Steelflex Grid Couplings are used in industrial power transmission systems where flexible shaft connection and torque transmission are required.
Typical applications include:
- Pumps and compressors: Connecting motors to pump or compressor shafts in industrial process systems.
- Fans and blowers: Transmitting motor power in ventilation, air-handling and industrial exhaust equipment.
- Conveyors: Connecting drive motors and gearboxes to conveyor drive shafts.
- Material handling equipment: Supporting power transmission in industrial handling and processing machinery.
- General industrial drives: Connecting motors, reducers and driven machines in production facilities.
The suitability of a coupling depends on the equipment's torque demand, starting conditions, operating speed, shaft alignment and duty cycle.
Key Selection Factors
Operating Torque
Determine the machine's normal and peak torque requirements. The selected coupling must have an adequate torque rating for the actual operating conditions, including starting loads and load fluctuations.
Operating Speed
Check the operating speed against the maximum allowable speed for the selected coupling size. The 1140T and 1210T have different speed limits and should not be treated as interchangeable.
Shaft Diameter and Bore
Confirm both shaft diameters, required finished bores, keyway dimensions and shaft-end details. The selected hub must accommodate the actual shaft dimensions.
Misalignment and Installation Conditions
Evaluate angular, parallel and axial shaft misalignment. Check the installation space, shaft separation and access required for inspection and lubrication.
Lubrication and Maintenance
Confirm the required grease type, lubrication procedure and maintenance interval against the manufacturer's instructions and the equipment's operating conditions.
Frequently Asked Questions
What is the function of a FALK Steelflex Grid Coupling?
It connects two rotating shafts and transmits torque through a flexible steel grid. The grid accommodates limited shaft misalignment and helps reduce torsional shock transmission.
What is the difference between 1140T and 1210T?
They are different T10 coupling sizes. The 1140T has a rated torque of 28,600 Nm and a maximum speed of 1,650 rpm. The 1210T has a rated torque of 249,000 Nm and a maximum speed of 820 rpm. Their bore ranges also differ.
Does the Steelflex T10 coupling require lubrication?
Yes. The grid assembly uses grease lubrication. Lubricant type, filling procedure and maintenance intervals should be confirmed using the applicable manufacturer's instructions.
What information is needed for coupling selection?
Provide the required torque, operating speed, motor and driven-machine details, shaft diameters, keyway dimensions, shaft spacing and operating conditions. Existing coupling model information or drawings can also help identify the required configuration.
Request a Quote
Send us your required FALK Steelflex Grid Coupling size, model number, shaft dimensions and operating conditions. If the existing coupling nameplate or drawings are available, include them with your inquiry.
We can review the model and configuration requirements to help identify a suitable coupling for your industrial power transmission application.
Hot Tags: falk steelflex grid coupling, China falk steelflex grid coupling suppliers, factory


