Product Overview
FLENDER ARPEX Disc Coupling is an all-steel, torsionally rigid coupling designed for power transmission in industrial drive systems. This FLENDER ARPEX all-steel coupling uses a multiple-disk construction to transmit torque without torsional backlash while allowing the connected shafts to accommodate defined axial, angular and, with the appropriate configuration, radial misalignment.
The ARPEX range covers nominal torques from 5 Nm to 10,000,000 Nm, with an operating temperature range of -40°C to +280°C. Different series and configurations are available for general industrial drives, pump applications, high-torque transmission, large shaft misalignment and installations with restricted space.
Selection depends on the required torque, operating speed, shaft arrangement, alignment conditions and installation dimensions. The coupling size and configuration must be checked against the actual operating conditions before ordering.
Key Features
All-steel multiple-disk construction
The coupling uses flexible steel disk packs connected between the coupling components. This structure provides torsional rigidity while allowing defined shaft displacement.
Backlash-free torque transmission
The disk packs transmit torque without circumferential backlash, making the coupling suitable for drive systems that require accurate rotational transmission.
No lubrication required
The all-steel disk pack design does not require lubricating grease or oil for torque transmission.
Misalignment compensation
A single-disk-pack configuration accommodates axial and angular misalignment. A design with two disk packs connected by a spacer can also compensate for radial misalignment. The permitted values depend on the selected series, size and coupling arrangement.
Multiple series for different drive requirements
The ARPEX range includes configurations for general industrial use, pump drives, high torque, larger shaft misalignment and limited installation space.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product type | All-steel multiple-disk coupling |
| Torque transmission | Torsionally rigid and backlash-free |
| Nominal torque range | 5–10,000,000 Nm |
| Operating temperature range | -40°C to +280°C |
| Flexible element | Steel disk pack |
| Lubrication | Not required |
| Misalignment compensation | Axial and angular; radial compensation with a suitable double-disk-pack arrangement |
| Configuration | Single-disk-pack or double-disk-pack arrangement, depending on design |
| Product series | ARS-6, ARC-8, ARP-6, ARW-4/6 and ARF-6 |
The torque and temperature ranges describe the ARPEX product family. The allowable operating values of an individual coupling depend on its series, size, design and operating conditions.
ARPEX Series and Configurations
ARS-6 Series
ARS-6 is the standard series for general industrial drive applications. It provides multiple sizes for different torque and shaft connection requirements.
ARC-8 Series
ARC-8 is designed for higher-torque transmission. It is suitable for drive systems where the required torque capacity is a primary selection factor.
ARP-6 Series
ARP-6 is designed for pump drives, including applications associated with API 610 and API 671 requirements. The applicable configuration and compliance requirements should be confirmed for the specific order.
ARW-4/6 Series
ARW-4/6 is designed for applications requiring larger shaft misalignment compensation. The allowable displacement must be checked against the selected coupling size and arrangement.
ARF-6 Series
ARF-6 is designed for installations with particularly restricted space. Its suitability depends on the available installation envelope and connection dimensions.
The series are not interchangeable by name alone. Torque capacity, speed limits, shaft connections, dimensions and misalignment allowances must be checked for the selected model.
Key Selection Factors
Required torque and operating speed
Provide the rated torque, peak or starting torque, operating speed and maximum speed. The coupling must be selected according to the actual load conditions rather than nominal motor power alone.
Shaft diameter and connection details
Specify the driving and driven shaft diameters, shaft-end dimensions, keyway or other connection requirements, and the available installation space. These details determine the suitable hub and coupling arrangement.
Shaft misalignment
Identify the expected axial, angular and radial displacement between the connected shafts. A single-disk-pack arrangement and a double-disk-pack arrangement have different compensation capabilities.
Operating environment
Provide the operating temperature, surrounding conditions, duty cycle and any applicable industry or equipment requirements. Applications in potentially explosive atmospheres require additional checks against the relevant operating instructions and temperature classification.
Replacement requirements
For an ARPEX disc coupling replacement, provide the existing coupling nameplate, series and size, complete type designation, drawings or clear photographs. The existing model should be checked against the current shaft and operating conditions before a replacement is confirmed.
Frequently Asked Questions
Does the FLENDER ARPEX Disc Coupling require lubrication?
No. Its all-steel disk-pack construction transmits torque without requiring lubricating grease or oil.
Can an ARPEX coupling compensate for radial misalignment?
Yes, when configured with two disk packs connected by a spacer. A single-disk-pack configuration compensates for axial and angular misalignment; it does not provide the same radial compensation arrangement.
How do I select the correct ARPEX coupling size?
Selection requires the operating torque, peak torque, speed, shaft dimensions, misalignment values and installation conditions. The selected model must be checked against the applicable FLENDER technical data.
What information is needed for a replacement inquiry?
Provide the existing coupling designation, nameplate information, shaft dimensions, operating speed, torque requirements and photographs or drawings. These details help identify the required series and configuration.
Request a Quote
As a China-based industrial coupling supplier, we handle inquiries for FLENDER ARPEX disc couplings. Send us your required ARPEX series or coupling designation, operating torque, speed, shaft dimensions and application details. For replacement inquiries, include the nameplate, drawings or product photographs.
We will use the supplied information to check the product designation and configuration for your inquiry. Final model selection and technical details should be confirmed against the applicable FLENDER documentation before order placement.
Hot Tags: flender arpex disc coupling, China flender arpex disc coupling suppliers, factory


