Products
FLENDER ZAPEX Gear Coupling

FLENDER ZAPEX Gear Coupling

FLENDER ZAPEX Gear Couplings are torsionally rigid, double-jointed gear couplings designed to transmit torque between connected machine shafts. Their gear-tooth construction accommodates shaft misalignment while maintaining a compact mechanical connection between driving and driven equipment.

Product Overview

FLENDER ZAPEX Gear Couplings are torsionally rigid, double-jointed gear couplings designed to transmit torque between connected machine shafts. Their gear-tooth construction accommodates shaft misalignment while maintaining a compact mechanical connection between driving and driven equipment.

The ZAPEX range includes ZN and ZW series with different torque capacities and structural configurations. The ZN series covers nominal torques from 1,020 to 162,500 Nm across 12 standard sizes. The ZW series covers 1,300 to 7,200,000 Nm across 31 standard sizes, with extended configurations available for torque requirements up to 13,500,000 Nm.

These industrial gear couplings are selected according to transmitted torque, operating speed, shaft dimensions, misalignment and installation arrangement. Identifying the correct series and model is essential because individual dimensions and operating limits vary between sizes.

Key Features

Double-Jointed Gear Construction

Two externally toothed hubs engage with internally toothed sleeves to transmit torque. The double-jointed construction accommodates angular and parallel shaft displacement. Axial movement accommodation depends on the coupling design and selected model.

High Torque Transmission

The ZN series provides nominal torque ratings from 1,020 to 162,500 Nm. The ZW series covers 1,300 to 7,200,000 Nm, with extended configurations reaching 13,500,000 Nm. The applicable torque rating must be checked against the selected coupling size and operating conditions.

Torsionally Rigid Transmission

The gear engagement provides torsionally rigid torque transmission. ZAPEX ZW configurations provide backlash-free torque transmission, an important consideration when evaluating the torsional characteristics of the connected drive system.

Lubrication and Sealing

The gear teeth use grease lubrication in the ZN series. ZW couplings use oil or grease lubrication, depending on the configuration. The ZW gear chamber uses DUO double-lip sealing rings. Lubricant selection and maintenance must follow the applicable model documentation.

Multiple ZW Configurations

The ZW range includes standard, adapter, intermediate-shaft, coupling-sleeve, brake-disc, brake-drum, rope-drum, shear-pin and clutch configurations. These arrangements address different shaft connections and installation requirements.

Technical Specifications

Parameter ZAPEX ZN ZAPEX ZW
Coupling type Double-jointed gear coupling Double-jointed gear coupling
Nominal torque range 1,020–162,500 Nm 1,300–7,200,000 Nm
Standard sizes 12 31
Extended torque capacity - Up to 13,500,000 Nm
Operating temperature -20°C to +80°C -20°C to +80°C
Transmission characteristic Torsionally rigid Torsionally rigid, backlash-free
Misalignment compensation Angular and radial Angular, parallel and axial
Lubrication Grease Oil or grease
Sealing Model-dependent DUO double-lip sealing rings
Structural configurations Model-dependent ZWN, ZZS, ZZW, ZWH, ZWBT, ZWBG, ZWB, ZWTR, ZBR and ZWS

Selected Model Specifications

The following specifications identify two individual coupling models. They are not interchangeable with general series ratings.

Parameter ZNBG 211 Variant AB ZZS 315 Variant B
Article number 2LC03305AR990AA0 2LC03008AE990AZ0
Rated torque 19,200 Nm 54,000 Nm
Maximum speed 1,850 rpm 3,300 rpm
Operating temperature -20°C to +80°C -20°C to +80°C
Permitted axial displacement ±1 mm ±1.5 mm
Permitted angular displacement 0.2° 1°
Hub length 105 mm 160 mm
Weight 35.5 kg 48 kg

Shaft bore, keyway dimensions, hub dimensions and other installation measurements must be checked against the corresponding model drawing and dimensional documentation.

Configuration Options

The ZAPEX ZW series includes different structural configurations for specific connection and installation arrangements.

Configuration Designation
Standard coupling ZWN
Adapter configuration ZZS
Intermediate-shaft configuration ZZW
Coupling-sleeve configuration ZWH
Brake-disc configurations ZWBT, ZWBG
Brake-drum configuration ZWB
Rope-drum configuration ZWTR
Shear-pin configuration ZBR
Clutch configuration ZWS

Standard hubs can also be replaced by multipurpose hubs. These hubs have a longer design and can be shortened to the required length where the applicable configuration permits.

The available configuration must be checked against the selected model. Special shaft bores, keyways and dimensional modifications should be confirmed against the actual product specification rather than assumed to be standard options.

Model Selection and Replacement

Torque and Operating Speed

Identify the required transmitted torque, operating speed and load conditions. Compare these values with the rated torque and maximum permitted speed of the selected coupling size. Starting loads, shock loads and reversing operation must also be considered during selection.

Shaft Bore and Connection Dimensions

Check the driving and driven shaft diameters, keyway dimensions, hub lengths and available installation space. Both shaft ends must match the coupling's specified connection dimensions.

Shaft Misalignment

Determine the angular, radial or parallel displacement between connected shafts, together with any axial movement. Compare the measured values with the limits specified for the selected model.

Configuration and Lubrication

Select the required structural arrangement according to the shaft connection, installation length and equipment layout. Confirm the applicable lubrication and sealing arrangement before ordering.

Existing Coupling Replacement

For replacement orders, provide the original ZAPEX designation, article number or equipment details. Existing coupling photographs, nameplate information and dimensional drawings help identify the correct model. A replacement should be checked against torque, speed, shaft dimensions and installation requirements rather than appearance alone.

Frequently Asked Questions

What is the difference between ZAPEX ZN and ZAPEX ZW?

Both are double-jointed gear couplings. ZN covers nominal torque ratings from 1,020 to 162,500 Nm, while ZW covers 1,300 to 7,200,000 Nm. Their available sizes, structural configurations and dimensional specifications differ.

What is the maximum torque capacity of a ZAPEX Gear Coupling?

The standard ZW series covers nominal torque ratings up to 7,200,000 Nm. Extended configurations can reach 13,500,000 Nm. The actual permitted torque depends on the selected model and its operating conditions.

What lubrication is used in ZAPEX Gear Couplings?

The ZN series uses grease lubrication. ZW couplings use oil or grease, depending on the configuration. ZW gear chambers use DUO double-lip sealing rings. The applicable operating instructions specify the lubrication requirements.

Can a ZAPEX Gear Coupling replace an existing coupling?

Replacement depends on torque capacity, operating speed, shaft dimensions, keyway arrangement, installation length and permitted misalignment. The original model designation and dimensional drawing should be checked before ordering.

Request a Quote

Contact us for FLENDER ZAPEX Gear Coupling supply and model identification.

Please provide the original model designation or article number, required quantity and equipment details. If available, include the existing coupling nameplate, photographs or dimensional drawings.

We can check the requested model and provide a quotation based on the confirmed product specification and supply availability.

Hot Tags: flender zapex gear coupling, China flender zapex gear coupling suppliers, factory

Send Inquiry